Homepage  >  中文版
Add: Building 3,No.3,West Area,Shangxue Technology City,Bantian,Longgang District,Shenzhen,China
  • Support
  • Three applications of industrial robots in PCB industry
    Date :2017-3-27

    Industrial robots were first used in the automobile manufacturing industry, the robot technology has developed to a wide range of applications, the automotive industry is still a high density of industrial robots using an industry. Relative to the welding, spraying, handling and other work in the production process, the PCB industry (printed circuit board) requires a higher accuracy of the robot, and the complexity of the work is relatively high. Here is to introduce the application of 3 industrial robots in the case of PCB industry.


    SCARA robot used in circuit board coil detection process
    Complete set of testing equipment currently on the market almost no multilayer coil short circuit, much of this work relies on manual work, PCB board large aperture artificial board will be on the test device and then open the equipment testing, PCB board with small aperture manual equipment (probe) to detect each coil. Can be done with the use of detection equipment SCARA robot baiting and para placement, complete testing on the aperture board all coils; for small aperture board, using the SCARA device to perform end fixed probe use is determined as probe for each coil for detection, we can effectively avoid the artificial equipment the operation because of small aperture or multi aperture coil and detection. Compared with the manual operation, the detection efficiency can be significantly improved, and the quality problems caused by missed detection can be avoided.


    Application of DELTA robot in the process of small circuit board
    The FPC tray is generally use artificial one to pick it up and put it inside the plastic tray, FPC soft and thin in pick it up is not easy, even experienced workers to complete the work efficiency is very low, Delta800 plus a vision system can pick up FPC from the messy pile of qualified then in accordance with the requirements placed into trays inside, the effect is not inferior to artificial. Its speed can reach 60 pieces of /min, can replace the manual to carry out sorting disk, which saves valuable labor resources, reduce the cost of the enterprise.


    Application of 6 axis industrial robot in AOI detection
    AOI scanning machines rely on traditional manual imitation version, version and board, a worker control two sets of scanning machines, the monotonous work every day, and just making circuit boards will be good exudes a pungent odor of bring certain harm to the human body, AOI scanning machine from the infrared light is a stealth killer, all of the worker's health harm, using multi joint robots instead of manual for two sets of AOI plate, a turning plate and the receiving board, each class can be completed and more than and 700 PCB and the comprehensive efficiency can reach 1 /min (including AOI scanning time machine). In the future, if you can further with the release plate with the upper and lower material transport line, connected to the AGV to do a fixed line transfer, you can achieve the full automation of the production process.


    Industrial robot with its advantages of high automation, are becoming more and more widely used in the industrial production line, with the continuous innovation of industrial robot technology, robot at high speed in the production process, also can guarantee the high precision, which makes the robot can make a difference in the PCB industry.



  • Tel:86-755-83416111   Fax:86-755-83416961   E-mail:sales@szektech.com   sitemap
  • Copyright 2014 © E-Tech (Shenzhen) Technology Ltd. All Rights Reserved